Instruction Manual

1. Prior to each use, it is recommended to remove excess debris from the disc with the Force Field & microfiber cloth or similar.

2. Once clean, insert the disc into the charging slot until it activates the internal Automatic switch.

3. Gently rotate disc 2x-3x for approximately 3 seconds*.

4. Remove the glow disc

5. Send it to first available.

NOTE: DO NOT store discs inside the Resonator unit. This will quickly drain the battery.

NOTE: Lithium batteries are sensitive to extreme temperatures. Please store Resonator units in moderate temperature.

​

*Dip durations that last longer than 3 seconds will decrease the total number of dips that a single battery charge will handle.

1. Backpack: Explore different configurations that work with your course flow. Consider your personal preferences with reach and grip for the "Disc Dip 'n Roll" action. Some Glow Disc Golfers like it mounted high in a putter pouch, some like it low in a side pocket, Some like it across the main compartment while using the pouches for their 'go-to' discs.

2. Shoulder Bag: Most shoulder bags have a side utility/putter pouch. So far we haven't met one that didn't fit. However, if it doesn't fit there, it will fit in the main compartment and take up the thickness of approximately 2 putters.

3. Cart: We have tested with many cart configurations, and it slides into most utility slots high near the handle. Cart mounting kit instructions below.

1. Invert the Resonator such that the brushes face down.

2. Wrap a cloth around a pen or screwdriver. Premium package includes a 'lollipop brush' for cleaning.

3. Insert into charging chamber and gently move the cleaning tool around the inside walls to free any debris.

4. Remove the cleaning tool.

1. The charging port is located on the top face of the Resonator, covered with a rubber dust plug.

2. Connect a USB-C charging cable to the charging port.

3. Charging status light: Red light indicates charging in progress, Blue light indicates charging complete.

NOTE The USB-C charging port is only compatible with 5V USB cords/bricks. All cellphone charging bricks and car USB ports that have been tested have worked for charging. Unfortunately, the USB-C charging port does not seem to work with laptop charging bricks (USB PD "power delivery") or USB-C to USB-C cords. A constant red or blue light must be shining through the translucent viewing window on the side to indicate that the charging brick works with the Resonator.

Docking accessories onto dovetail seems to be most controlled with the following procedure:

1. Place the accessory upside-down onto a flat surface like a tabletop.

2. Invert the Resonator so it is also upside-down, but hovering above - such that the dovetails align.

3. Gently press the Resonator (inverted) down toward the table so that the dovetails mate.

4. Once alignment is achieved, firmly press the Resonator down until both Resonator and accessory are flush with the surface top.

​

Undocking Accessories

1. Gently shift the accessory back and forth while maintain a constant force in the up direction until the accessory dock slides free.